---
date: "2016-12-01T16:00:00+02:00"
title: "Authentication"
slug: "authentication"
sidebar_position: 10
toc: false
draft: false
aliases:
  - /en-us/authentication
menu:
  sidebar:
    parent: "usage"
    name: "Authentication"
    sidebar_position: 10
    identifier: "authentication"
---

# Authentication

## LDAP (Lightweight Directory Access Protocol)

Both the LDAP via BindDN and the simple auth LDAP share the following fields:

- Authorization Name **(required)**

  - A name to assign to the new method of authorization.

- Host **(required)**

  - The address where the LDAP server can be reached.
  - Example: `mydomain.com`

- Port **(required)**

  - The port to use when connecting to the server.
  - Example: `389` for LDAP or `636` for LDAP SSL

- Enable TLS Encryption (optional)

  - Whether to use TLS when connecting to the LDAP server.

- Admin Filter (optional)

  - An LDAP filter specifying if a user should be given administrator
    privileges. If a user account passes the filter, the user will be
    privileged as an administrator.
  - Example: `(objectClass=adminAccount)`
  - Example for Microsoft Active Directory (AD): `(memberOf=CN=admin-group,OU=example,DC=example,DC=org)`

- Username attribute (optional)

  - The attribute of the user's LDAP record containing the user name. Given
    attribute value will be used for new Gitea account user name after first
    successful sign-in. Leave empty to use login name given on sign-in form.
  - This is useful when supplied login name is matched against multiple
    attributes, but only single specific attribute should be used for Gitea
    account name, see "User Filter".
  - Example: `uid`
  - Example for Microsoft Active Directory (AD): `sAMAccountName`

- First name attribute (optional)

  - The attribute of the user's LDAP record containing the user's first name.
    This will be used to populate their account information.
  - Example: `givenName`

- Surname attribute (optional)

  - The attribute of the user's LDAP record containing the user's surname.
    This will be used to populate their account information.
  - Example: `sn`

- E-mail attribute **(required)**
  - The attribute of the user's LDAP record containing the user's email
    address. This will be used to populate their account information.
  - Example: `mail`

### LDAP via BindDN

Adds the following fields:

- Bind DN (optional)

  - The DN to bind to the LDAP server with when searching for the user. This
    may be left blank to perform an anonymous search.
  - Example: `cn=Search,dc=mydomain,dc=com`

- Bind Password (optional)

  - The password for the Bind DN specified above, if any. _Note: The password
    is stored encrypted with the SECRET_KEY on the server. It is still recommended
    to ensure that the Bind DN has as few privileges as possible._

- User Search Base **(required)**

  - The LDAP base at which user accounts will be searched for.
  - Example: `ou=Users,dc=mydomain,dc=com`

- User Filter **(required)**
  - An LDAP filter declaring how to find the user record that is attempting to
    authenticate. The `%[1]s` matching parameter will be substituted with login
    name given on sign-in form.
  - Example: `(&(objectClass=posixAccount)(|(uid=%[1]s)(mail=%[1]s)))`
  - Example for Microsoft Active Directory (AD): `(&(objectCategory=Person)(memberOf=CN=user-group,OU=example,DC=example,DC=org)(sAMAccountName=%s)(!(UserAccountControl:1.2.840.113556.1.4.803:=2)))`
  - To substitute more than once, `%[1]s` should be used instead, e.g. when
    matching supplied login name against multiple attributes such as user
    identifier, email or even phone number.
  - Example: `(&(objectClass=Person)(|(uid=%[1]s)(mail=%[1]s)(mobile=%[1]s)))`
- Enable user synchronization
  - This option enables a periodic task that synchronizes the Gitea users with
    the LDAP server. The default period is every 24 hours but that can be
    changed in the app.ini file. See the _cron.sync_external_users_ section in
    the [sample
    app.ini](https://github.com/go-gitea/gitea/blob/main/custom/conf/app.example.ini)
    for detailed comments about that section. The _User Search Base_ and _User
    Filter_ settings described above will limit which users can use Gitea and
    which users will be synchronized. When initially run the task will create
    all LDAP users that match the given settings so take care if working with
    large Enterprise LDAP directories.

### LDAP using simple auth

Adds the following fields:

- User DN **(required)**

  - A template to use as the user's DN. The `%s` matching parameter will be
    substituted with login name given on sign-in form.
  - Example: `cn=%s,ou=Users,dc=mydomain,dc=com`
  - Example: `uid=%s,ou=Users,dc=mydomain,dc=com`

- User Search Base (optional)

  - The LDAP base at which user accounts will be searched for.
  - Example: `ou=Users,dc=mydomain,dc=com`

- User Filter **(required)**
  - An LDAP filter declaring when a user should be allowed to log in. The `%[1]s`
    matching parameter will be substituted with login name given on sign-in
    form.
  - Example: `(&(objectClass=posixAccount)(|(cn=%[1]s)(mail=%[1]s)))`
  - Example: `(&(objectClass=posixAccount)(|(uid=%[1]s)(mail=%[1]s)))`

### Verify group membership in LDAP

Uses the following fields:

- Group Search Base (optional)

  - The LDAP DN used for groups.
  - Example: `ou=group,dc=mydomain,dc=com`

- Group Name Filter (optional)

  - An LDAP filter declaring how to find valid groups in the above DN.
  - Example: `(|(cn=gitea_users)(cn=admins))`

- User Attribute in Group (optional)

  - Which user LDAP attribute is listed in the group.
  - Example: `uid`

- Group Attribute for User (optional)
  - Which group LDAP attribute contains an array above user attribute names.
  - Example: `memberUid`

## PAM (Pluggable Authentication Module)

This procedure enables PAM authentication.  Users may still be added to the
system manually using the user administration.  PAM provides a mechanism to
automatically add users to the current database by testing them against PAM
authentication.  To work with normal Linux passwords, the user running Gitea
must also have read access to `/etc/shadow` in order to check the validity of
the account when logging in using a public key.

**Note**: If a user has added SSH public keys into Gitea, the use of these
keys _may_ bypass the login check system.  Therefore, if you wish to disable a user who
authenticates with PAM, you _should_ also manually disable the account in Gitea using the
built-in user manager.

1. Configure and prepare the installation.
    - It is recommended that you create an administrative user.
    - Deselecting automatic sign-up may also be desired.
1. Once the database has been initialized, log in as the newly created
administrative user.
1. Navigate to the user setting (icon in top-right corner), and select
`Site Administration` -> `Authentication Sources`, and select
`Add Authentication Source`.
1. Fill out the field as follows:
    - `Authentication Type` : `PAM`
    - `Name` : Any value should be valid here, use "System Authentication" if
    you'd like.
    - `PAM Service Name` : Select the appropriate file listed under `/etc/pam.d/`
    that performs the authentication desired.[^1]
    - `PAM Email Domain` : The e-mail suffix to append to user authentication.
    For example, if the login system expects a user called `gituser`, and this
    field is set to `mail.com`, then Gitea will expect the `user email` field
    for an authenticated GIT instance to be `gituser@mail.com`.[^2]

**Note**: PAM support is added via [build-time flags](installation/install-from-source.md#build),
and the official binaries provided do not have this enabled.  PAM requires that
the necessary libpam dynamic library be available and the necessary PAM
development headers be accessible to the compiler.

[^1]: For example, using standard Linux log-in on Debian "Bullseye" use
`common-session-noninteractive` - this value may be valid for other flavors of
Debian including Ubuntu and Mint, consult your distribution's documentation.
[^2]: **This is a required field for PAM**.  Be aware: In the above example, the
user will log into the Gitea web interface as `gituser` and not `gituser@mail.com`

## SMTP (Simple Mail Transfer Protocol)

This option allows Gitea to log in to an SMTP host as a Gitea user. To
configure this, set the fields below:

- Authentication Name **(required)**

  - A name to assign to the new method of authorization.

- SMTP Authentication Type **(required)**

  - Type of authentication to use to connect to SMTP host, PLAIN or LOGIN.

- Host **(required)**

  - The address where the SMTP host can be reached.
  - Example: `smtp.mydomain.com`

- Port **(required)**

  - The port to use when connecting to the server.
  - Example: `587`

- Allowed Domains

  - Restrict what domains can log in if using a public SMTP host or SMTP host
    with multiple domains.
  - Example: `gitea.io,mydomain.com,mydomain2.com`

- Force SMTPS

  - SMTPS will be used by default for connections to port 465, if you wish to use SMTPS
  for other ports. Set this value.
  - Otherwise if the server provides the `STARTTLS` extension this will be used.

- Skip TLS Verify

  - Disable TLS verify on authentication.

- This Authentication Source is Activated
  - Enable or disable this authentication source.

## FreeIPA

- In order to log in to Gitea using FreeIPA credentials, a bind account needs to
  be created for Gitea:

- On the FreeIPA server, create a `gitea.ldif` file, replacing `dc=example,dc=com`
  with your DN, and provide an appropriately secure password:

  ```sh
  dn: uid=gitea,cn=sysaccounts,cn=etc,dc=example,dc=com
  changetype: add
  objectclass: account
  objectclass: simplesecurityobject
  uid: gitea
  userPassword: secure password
  passwordExpirationTime: 20380119031407Z
  nsIdleTimeout: 0
  ```

- Import the LDIF (change localhost to an IPA server if needed). A prompt for
  Directory Manager password will be presented:

  ```sh
  ldapmodify -h localhost -p 389 -x -D \
  "cn=Directory Manager" -W -f gitea.ldif
  ```

- Add an IPA group for gitea_users :

  ```sh
  ipa group-add --desc="Gitea Users" gitea_users
  ```

- Note: For errors about IPA credentials, run `kinit admin` and provide the
  domain admin account password.

- Log in to Gitea as an Administrator and click on "Authentication" under Admin Panel.
  Then click `Add New Source` and fill in the details, changing all where appropriate.

## SPNEGO with SSPI (Kerberos/NTLM, for Windows only)

Gitea supports SPNEGO single sign-on authentication (the scheme defined by RFC4559) for the web part of the server via the Security Support Provider Interface (SSPI) built in Windows. SSPI works only in Windows environments - when both the server and the clients are running Windows.

Before activating SSPI single sign-on authentication (SSO) you have to prepare your environment:

- Create a separate user account in active directory, under which the `gitea.exe` process will be running (eg. `user` under domain `domain.local`):

- Create a service principal name for the host where `gitea.exe` is running with class `HTTP`:

  - Start `Command Prompt` or `PowerShell` as a privileged domain user (eg. Domain Administrator)
  - Run the command below, replacing `host.domain.local` with the fully qualified domain name (FQDN) of the server where the web application will be running, and `domain\user` with the name of the account created in the previous step:

  ```sh
  setspn -A HTTP/host.domain.local domain\user
  ```

- Sign in (_sign out if you were already signed in_) with the user created

- Make sure that `ROOT_URL` in the `[server]` section of `custom/conf/app.ini` is the fully qualified domain name of the server where the web application will be running - the same you used when creating the service principal name (eg. `host.domain.local`)

- Start the web server (`gitea.exe web`)

- Enable SSPI authentication by adding an `SPNEGO with SSPI` authentication source in `Site Administration -> Authentication Sources`

- Sign in to a client computer in the same domain with any domain user (client computer, different from the server running `gitea.exe`)

- If you are using Chrome or Edge, add the URL of the web app to the Local intranet sites (`Internet Options -> Security -> Local intranet -> Sites`)

- Start Chrome or Edge and navigate to the FQDN URL of Gitea (eg. `http://host.domain.local:3000`)

- Click the `Sign In` button on the dashboard and choose SSPI to be automatically logged in with the same user that is currently logged on to the computer

- If it does not work, make sure that:
  - You are not running the web browser on the same server where Gitea is running. You should be running the web browser on a domain joined computer (client) that is different from the server. If both the client and server are running on the same computer NTLM will be preferred over Kerberos.
  - There is only one `HTTP/...` SPN for the host
  - The SPN contains only the hostname, without the port
  - You have added the URL of the web app to the `Local intranet zone`
  - The clocks of the server and client should not differ with more than 5 minutes (depends on group policy)
  - `Integrated Windows Authentication` should be enabled in Internet Explorer (under `Advanced settings`)

## Reverse Proxy

Gitea supports Reverse Proxy Header authentication, it will read headers as a trusted login user name or user email address. This hasn't been enabled by default, you can enable it with

```ini
[service]
ENABLE_REVERSE_PROXY_AUTHENTICATION = true
```

The default login user name is in the `X-WEBAUTH-USER` header, you can change it via changing `REVERSE_PROXY_AUTHENTICATION_USER` in app.ini. If the user doesn't exist, you can enable automatic registration with `ENABLE_REVERSE_PROXY_AUTO_REGISTRATION=true`.

The default login user email is `X-WEBAUTH-EMAIL`, you can change it via changing `REVERSE_PROXY_AUTHENTICATION_EMAIL` in app.ini, this could also be disabled with `ENABLE_REVERSE_PROXY_EMAIL`

If set `ENABLE_REVERSE_PROXY_FULL_NAME=true`, a user full name expected in `X-WEBAUTH-FULLNAME` will be assigned to the user when auto creating the user. You can also change the header name with `REVERSE_PROXY_AUTHENTICATION_FULL_NAME`.

You can also limit the reverse proxy's IP address range with `REVERSE_PROXY_TRUSTED_PROXIES` which default value is `127.0.0.0/8,::1/128`. By `REVERSE_PROXY_LIMIT`, you can limit trusted proxies level.

Notice: Reverse Proxy Auth doesn't support the API. You still need an access token or basic auth to make API requests.
